1″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/2″ Square Drive 12 Point Deep Socket Wrench
Deep sockets made of a special alloy steel.
1/2″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/2″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/2″ Square Drive Socket for Impact Wrench
Heavy duty six point square drive sockets for use with the impact wrench. Various sizes with different square drives are available.
1/4″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
2-Arm Gear and Wheel Puller
Specially designed for LNG-LPG vessels and tankers, but also essential for factories handling explosive materials. Made of beryllium material except for the gears which are tightly covered by copper alloy casing assuring no sparking during operation.
2-Extension Aluminum Ladder
Made in two sections from aluminium alloy with round non-slip rungs. Has non-slip rubber shoes at the bottom end with an automatic spring lock on each step which has a 35cm stepping space. Easy to carry and set up whenever it is required.
3-Arm Gear and Wheel Puller
Drop forged from vanadium steel. This rigid 3 arm puller has been designed for situations where the use of a 2 arm puller is not possible.
3-Extension Aluminum Ladder
Made in three sections from aluminium alloy with non-slip rungs and self-aligning safety shoes. Please specify the extended length when ordering.
3-Way Tool Bit Holder
A tool for holding square tool bits in three ways. Furnished with an allen hexagon key.
3/4″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
3/4″ Square Drive Socket for Impact Wrench
Heavy duty six point square drive sockets for use with the impact wrench. Various sizes with different square drives are available.
3/8″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
3/8″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
45 degree Pipe Wrench
45 degree angle jaws with offset teeth in opposite directions. Teeth are additionally induction hardened. Made of chrome vanadium steel, oil-hardened and tempered.
6 Point Y-Type Wrench
Made from selected alloy steel and heat-treated. It has 3 openings for 3 nut sizes, and the 2 vacant bars can be used as handles.
6-Point T-Type Wrench
Broached and chrome plated with a smoothed surface.
Abrasive Sandpaper
Ideal abrasive for hand sanding wood, paint fillers, paint under coats and varnishes.
Abrasive Wheel
Aluminum oxide abrasive wheels. Available in various diameters, thickness and grits. Used with bench grinders.
Accessories for Air Operated Grease Pump
For use with above air operated grease pumps.
Adjustable Hook Spanner
This spanner has the advantage of strength and adjustability. One wrench can be used for bolts of a variety of sizes by simply adjusting the jaw. The handle is strengthened so that the wrench can be used safely with a hammer.
Adjustable Reamer Set
Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.
Adjustable Speed Wrench
A tool that serves as an adjustable wrench and a pipe wrench. The jaws are milled extra deep for speedy operation.
Adjustable Wrench
Drop forged from special alloy steel with thin tapered jaws. A square shoulder on the sliding jaw shank prevents it from loosening during use. The head has a polished finish and the handle is chromed.
Air Line Filter
Designed for cleaning of compressed air and draining water drips.
The standard filtration is 5 uW and the maximum working pressure is 9.9kgf. The maximum working temperature is 60 degrees. The filter case is made of polycarbonate material and reinforced by a guard. A bracket and auto drain are also available on request.
Air Line FRL Combination
Comprised of an air line filter, regulator with pressure gauge, lubricator and intermediate connectors. For use in compressed air filtration, regulation and lubrication. The maximum operating pressure is 9.9kgf and the maximum operating temperature is 60 degrees. The standard filtration is 5 uW
Air Line Pressure Regulator
Non relief valve type regulator for use on airlines to maintain consistent pressure. The maximum operating pressure is 9.9kgf and maximum operating temperature is 60 degrees. A pressure gauge is included as a standard accessory with the unit.
Air Powered Grease Lubricator
Works with compressed air for easy speed greasing by just pulling the trigger. Pressure is maintained constantly and the lubrication level is consistent. Works with a replaceable grease cartridge which is easy to attach and keep dust and dirt out of the grease. Grease level inside the cartridge can be checked at a glance so the grease will not run out unexpectedly.
Air-Operated Grease Pump
A pump unit for all types of lubricants which is easy to handle and maneuver, making it suitable for work on ships as well as industrial plants or repair shops.
Allen Hexagon Wrench (Inches)
A common tool used for tightening and loosening hexagon head cap screws.
Allen Hexagon Wrench (Metric)
A common tool used for tightening and loosening hexagon head cap screws.
Allen Hexagon Wrench Set
A common tool used for tightening and loosening hexagon head cap screws. Available in a set of common sizes, in metric and inches.
Angle Edge Bolt Cutter
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Angle Head Electrode Holder
A screw-on closed head electrode holder with extreme tight grip on the electrode, wide range of applications and optimal electric safety.
Angle Radiator Brush
Black bristle hair bound by a metal band. Provided with a long handle to reach difficult spots.
Automatic Reverse-Flow Prevention Coupling
These couplings are fitted to the outlet pipe, connecting hose and the welding/cutting machine and outfit, removing possible riskd accompanying the gas welding/cutting operation and making preparation and maintenance of the welding/cutting machines easy. Further, each type is specially designed for oxygen or fuel gas so as to prevent mistakes. A spring-loaded locking method is used, fitting or removal is a single action, which minimizes hose damage and make maintenance easy.
Automatic Screwdriver with Ratchet
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Back Saw
For general use in connection with mitre box and cabinet work. Stiff blade with a heavy steel back. Solid hard wood handle.
Ball Pein Hammer
The perfect ball pein hammer for all industries. Accurately balanced. Has a tough drop forged head with a selectively hardened face and pein. Fine quality, lacquer finished, with hickory handles shaped for ease in use.
Banding Clamp & Tool
These products have a wide range of application for hose and pipe fastening and are used in most industries. Tensioning tools, bands, buckles, performed clamps, hose couplings, mounting brackets, accessories and spare parts offer a universal and economical fastening system. The products will connect, clamp, fasten, secure and fix hoses, pipes, cables, signs, boards, etc.
Bearing Feeler Gauge
Used for measuring main bearing clearance of marine engine. When the rod “S” has been pressed through the pipe “R” can be pushed away from the brass by further pressing on the rod “S” and when a distance “a” is obtained it is easy to feel the fit of the feeler in the clearance.
Bearing Puller Set
The slide hammer bearing puller set has been designed for removing “hard-to-pull’ bearings without damaging the bearing housing. Expansion grippers are available from No. 00 to 06. These numbers 00 to 06 are indicating the last two numbers of the bearing number. When ordering, please make sure to indicate the last two bearing figures to get the right tools for your work. The expansion grippers are drop forged from vanadium alloy steel, heat-treated and chromed plated.
This bearing puller kit has been designed to remove the inner and outer bearing rings from bearing mounted to various fittings, shafts, etc. Made of drop forged, heat-treated vanadium alloy steel.
Beewax
For waxing twine or thread to be used in sewing or stitching canvas, leather, etc.
Belt Sling
Various types of belt slings are available. Used for securing pallets during transportation.
Bench Level
A popular level made of cast iron. Provided with a level vial and a plumb vial.
Bevel Rolling Center
Used in combination with a lathe or an external grinding machine, the bevel rolling center serves as a center pusher for steel pipe or a workpiece with a large central opening and without a centering hole.
Blacksmiths’ Sledge Hammer with Handle
This double head hammer with smooth faces can be furnished with or without a handle. When ordering, please specify whether a handle is required or not. The hammer head will be furnished without a handle unless otherwise specified.