Digital Calipers
A compact, easy to use caliper graduated in 0.01mm increments. All measures are shown on a digital display making it easier to take quick, precise measurements. The graphic display will indicate whether the tool is set for the measurement of inside or outside diameters.
Vernier Calipers
Made of high grade stainless steel with a satin chrome finish. Available in metric graduation, or metric and inch graduation.
Depth Micrometer
Measures the depth of holes, projections, etc. Provided with a hardened tip and threaded ground screw, adjustable for wear. The face of the bass is hardened and planed to maintain a level surface. Graduated in increments of 0.01mm
Jointed Inside Micrometer
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a marrk and must not be used on any other micrometer. When assembling, clean the joining faces perfectly. Graduated in 0.01mm increments
Tubular Type Inside Micrometer
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01mm increments. Micrometers with counters displays are also available upon request.
Outside Micrometer with Interchangeable Anvil
Each micrometer is equipped with a series of interchangeable anvils. Each anvil is marked to show its capacity and is fitted with an adjustable collar to prevent wear. Graduated in 0.01mm increments.
Outside Micrometer with Counter
A numeral counter indicates sizes simulaneously as the measurements are being taken. The display is very easy to read. Graduated in 0.01mm increments from 25mm to 500mm on the standard size micrometer but micrometers up to 1000mm are also available upon request.
Outside Micrometer
Graduated in 0.01mm increments with standard measurement sizes from 25mm to 500mm. Micrometers measuring up to 1000mm are also available upon request.
Spring Divider
Made of hardened steel with points that are extra tempered for scribing on iron surfaces. Has a rigid spring and an adjustable quick setting screw.
Steel Compass
Made of hardened steel with points that are extra hard tempered for scribing circles on iron plates.
One-Side Calipers
For measuring the thickness of the walls of pipes or values, etc. Made of hardened steel with tempered steel points.
Spring Inside Calipers
Has point of a shape suitable to work in threads.
Inside Calipers
For measuring the inside diameter of pipes, fitting, etc. Made of hardened steel with points of tempered steel to prevent wear.
Spring Outside Calipers
For the outside measurement of threads. The tips are specially shaped shaped to fit suitably to the threads.
Outside Calipers
For the easy measurement of the outer diameter of pipes and other round objects. Made of hardened steel with tips of tempered steel.
Step Drill
Made of heat treated steel and can create various hole sizes by single drill in steel, stainless steel, plastic or wood up to 6mm depth.
Carbide Tipped Hole Saw
Made of a selected high speed steel or tungsten carbide tip for cutting smooth and accurate holes. Available cutting depth is 5mm for standard type hole saw and 38mm for deep cut type hole saw.
HSS Hole Saw
Made of a selected high speed steel or tungsten carbide tip for cutting smooth and accurate holes. Available cutting depth is 5mm for standard type hole saw and 38mm for deep cut type hole saw.
Valve Seat Cutter
These value seat cutting tools are easier than ordinary type cutters in assembly and handling for precision cutting work. Remove the value cap or flange and fit the suitable cutter to the spindle. Then, set the fixing bed using a tightening bolt for the cap or flange. Check that the cutter fits horizontally with the value seat and is in the center position. At this point you set the adjustable, begin the cutting operation by turning the handle clockwise. A standard set of 1″ to 4″ cutters.
Stock for Round Die
Adjustable handle for round dies. Select suitable diameter to fit your round dies.
Tap Wrench
The jaws are made of tool steel, carefully hardened and tempered for perfect performance. The handle is knurled for safe, easy operation.
Universal Thread Repair Tool Set
Thread repair tool set containing different model of thread repair tools.
Thread Restorer
A square bar type restorer with 8 different lands. Where a die cannot be used, a few easy passes with the apporpriate land of the restorer over the damaged face of a bolt or a pipe will restore the thread wihout reducing the diameter. As only the displaced metal removed, the original fit is preserved
Knurls for Knurling Holder
Individually hob-cut from extra high carbon tool steel. Heat treated, tempered and tested to obtain sharp, perfectly formed teeth in every knurl. Can be furnished in coarse, medium or fine grade and in either straight line or diamond pattern.
Knurling Tool Holder
Self centering knuckle or joint has ample bearings to resist the severe strains of both end and side thrust. 2 types, A & B are available. Please specify which type is required when ordering.
Boring Tool Holder with Square Shank Tool Bit
Quickly exchangeable caps, straight (90 degree) or angular (30 degree).
Spring Cut-off Tool Holders
This design relieves the cutter blade from excessive pressure, avoiding chattering and climbing of the blade during cutting operation. For holding plate tool bits.
3-Way Tool Bit Holder
A tool for holding square tool bits in three ways. Furnished with an allen hexagon key.
Cemented Carbide Tip
These carbide tips are used with carbide tipped turning cutters. Tips are fitted with cement.
Single Point Tools with Cemented Carbide Tip
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips.
Rectangular Tool Bit
High speed, steel tool bit material is not hardened as it is made for general use. The material is available in 2 types, square and rectangular, to suit the users requirements. These plates are supplied in 300mm length pieces.
Square Tool Bit Material
High speed, steel tool bit material is not hardened as it is made for general use. The material is available in 2 types, square and rectangular, to suit the users requirements. These plates are supplied in 300mm length pieces.
Plate Cutting-off Tool Bit
For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.
Rectangular Plate Tool Bit
For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.
Rectangular Flat Tool Bit
For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.
Square Tool Bit
For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.
Carbide Rotary Bur
Designed for the efficient, bevelling of gears, burning, planing, shaping and milling, These rotary burs are advantageous for use with portable grinding tools of 10000 R.P.M. or more. Please specify the type, size of the blade and the shank when ordering.
Screw Extractor Set
With the screw extractor, the broken bolt or screw threaded hole can be easily removed without injuring threads.
Bevel Rolling Center
Used in combination with a lathe or an external grinding machine, the bevel rolling center serves as a center pusher for steel pipe or a workpiece with a large central opening and without a centering hole.
Rolling Center
Specially designed to withstand high-speed heavy-duty operations. Incorporated are a taper roller bearing, thrust ball bearing, ball bearing and other special bearings.
Drill Drift
For removing taper shanks without any damage from drills sockets or drilling machines. This improved type works more efficienty and is safer.
Drill Chuck Arbor
For use with drilling machines, lathes, etc. When ordering, please specify nominal numbers.
Morse Taper Shank Drill Socket
Designed to be used with drill, reamer and other shanks which have a morse taper shank.
Drill Sleeve
Designed for drilling with Morse taper shanks, The smaller Morse taper number is for the hole size of the drill insertion and the larger Morse taper number for the outside socket fitting.
Keyless Drill Chuck
The keyless drill chuck is usually used on precision drilling machinery where close tolerance drilling is essential. Designed for both tool room and production machinery where accuracy, gripping power and keyless features are desired.
Drill Chuck with Key
These drill chucks are offered for light-duty and heavy-duty portable, bench, or floor type power tools in a wide range of capacities for either threaded or tapered mounting spindles.
Lathe Dog
The opening of the lathe dog is machined with the face at a right angle. Please indicate straight or bent tail when ordering.
Screw Plate Set
These sets are designed for cutting threads of a variety of sizes easily, all with one set. Suitable for jobs involving a wide range of on site threading work. These are single tap or three tap sets available in the same thread cutting range. When ordering, please specify the set number, thread cutting range, and thread type, (whitworth, metric, etc), by indicating the exact code number.
Whitworth Coarse Thread Hexagon Die
For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.
Metric Coarse Hexagon Rethreading Die
For dressing over bruised or rusty threads, or cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.
Whitworth Coarse Thread Die
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
Metric Fine Thread Die
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
Metric Coarse Thread Die
These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.
Metric Fine Thread Hand Tap
The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand . Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.
Metric Coarse Hand Tap
The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand . Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.
Adjustable Reamer Set
Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.