For the easy measurement of the outer diameter of pipes and other round objects. Made of hardened steel with tips of tempered steel.

For the outside measurement of threads. The tips are specially shaped shaped to fit suitably to the threads.

For measuring the inside diameter of pipes, fitting, etc. Made of hardened steel with points of tempered steel to prevent wear.

Has point of a shape suitable to work in threads.

For measuring the thickness of the walls of pipes or values, etc. Made of hardened steel with tempered steel points.

Made of hardened steel with points that are extra hard tempered for scribing circles on iron plates.

Graduated in 0.01mm increments with standard measurement sizes from 25mm to 500mm. Micrometers measuring up to 1000mm are also available upon request.

A numeral counter indicates sizes simulaneously as the measurements are being taken. The display is very easy to read. Graduated in 0.01mm increments from 25mm to 500mm on the standard size micrometer but micrometers up to 1000mm are also available upon request.

Each micrometer is equipped with a series of interchangeable anvils. Each anvil is marked to show its capacity and is fitted with an adjustable collar to prevent wear. Graduated in 0.01mm increments.

A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01mm increments. Micrometers with counters displays are also available upon request.

Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a marrk and must not be used on any other micrometer. When assembling, clean the joining faces perfectly. Graduated in 0.01mm increments

Measures the depth of holes, projections, etc. Provided with a hardened tip and threaded ground screw, adjustable for wear. The face of the bass is hardened and planed to maintain a level surface. Graduated in increments of 0.01mm

Made of high grade stainless steel with a satin chrome finish. Available in metric graduation, or metric and inch graduation.

A compact, easy to use caliper graduated in 0.01mm increments. All measures are shown on a digital display making it easier to take quick, precise measurements. The graphic display will indicate whether the tool is set for the measurement of inside or outside diameters.

Made of hardened stainless steel. Graduated in increments of 0.05mm in metric sizes only.

Particularly popular with machinists and tool markers for gauging narrow slots as well as for adjusting the air gaps of valves on motors. The leaves are made of tempered steel and have the thickness marked on them. The gauges listed below are classified as A Type because they have straight leaves. Type B gauges with tapered leaves are also available upon request.

Similar to feeler or thickness gauges but with longer leaves in order to measure between the stator and coil of a generator.

Used for measuring main bearing clearance of marine engine. When the rod “S” has been pressed through the pipe “R” can be pushed away from the brass by further pressing on the rod “S” and when a distance “a” is obtained it is easy to feel the fit of the feeler in the clearance.

Designed to quickly determine the pitch of nut, bolt, and screw threads.

A handy gauge used for inspecting the center angles of the lathe and the angles of screw making tools. Available in 55 degree and 60 degree. Made of hardened steel.

For gauging steel wires, drill rods, sheets, plates and wires of non-ferrous metal.

For measuring the diameter of drills.

Painted metal case with brass dial and white markings, shock absorbing mechanism and zinc plated hook. Multipurpose use (weighing cold stores, bulk foods, etc.).

These engineer’s precision rules are made of stainless steel and dull chromed to make the graduations easy to read. Graduated in increments of 0.5mm.

Available in stainless steel or wood, with machine marked graduations.

Locking, power-return, white steel convex rule, 12mm (1/2″) wide flexible steel blade in a plastic case. Available in metric standard or in metric and inch sizes.

13mm wide measuring tape available in linen, steel or stainless steel. The tape is easy to ravel and unravel and the metric graduations are clearly visible. The tape is contained in a black, vinyl laminated, metal case with a flush handle.

So called ullage tape. Made of steel or stainless steel with a chromed brass drawing weight attached. Metric or metric and inch graduated tapes are available. The tapes are mounted to a strong frame with a wooden carrying handle. Tapes of lengths up to 50mtr are also available upon request.

A paste for use with oil gauging tape. The colour of the paste will change from yellow to red upon contact with water.

A chemical paste used with oil gauging tape for measuring the presence of various types of oils. The colour of the paste will generally change from light blue to red upon contact with oil. This paste will detect almost any kind of oil including mineral oil, vegetable oil, animal oil and solvents such as benzol, alcohol, acrylic solution, alkaline solution and spirits.

Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request.

For carpenters or machinists use. Made of polished tool steel and graduated in 1mm increments.

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non-graduated types are most commonly used but graduated types are also available upon request.

Combination sets are useful for all types of mechanical jobs. The set is comprised of a straight protractor is graduated to read from zero to 180 in both directions. The rule is made of stainless steel and is graduated in both 0.5mm and 1mm increments. The square head has a level and a scriber point. The protractor head, center head, and square head are all made of cast iron.

Same composition as above without protractor.

Machine finished economical surface plate made of cast iron. Most common sizes are listed below in box type and round type.

These surface gauges are handy, well proportioned and rigid. Composed of a heavy, cast iron base and a mild steel rod supporting a scriber which has tempered points. Common sizes are listed below but gauges with longer spindles, up to 1000mm in the round base and 2000mm in the square base are available upon request.

Stethoscope type sound inspection instrument for detecting worn out parts, cracks of engines, motors, missing gear box, compressors, dynamos, etc. Also useful for tracing irregularities in pipe-lines of gas, water, oil and electrical equipment.

Designed for sampling petroleum products in tanks or seawater. Made of brass in 1000cc sampling capacity. Mouth collecting type.

This standard dial gauge is simple, reliable, easy to read, very sensitive and shock proof. The bezel is rotated for zero setting.

This range of gauges is designed mainly for the measurements of cylinder bores but the ovality, taper, wear and other bore conditions may be measured with equal ease. Furnished without a dial gauge. When ordering, please indicate if the dial gauge is required.

The substantial “T” slotted base is accurately machined for all working surface and the vertical and horizontal arms ensure fully universal movements of the dial gauge. All dial gauge stands are furnished without a dial gauge.

A handy tool for taking off gauge pointers without damaging the gauge reading surface. Useful for almost all pressure, vacuum and compound gauges or any other pointer types.