Used in combination with a lathe or an external grinding machine, the bevel rolling center serves as a center pusher for steel pipe or a workpiece with a large central opening and without a centering hole.

Quickly exchangeable caps, straight (90 degree) or angular (30 degree).

Designed for the efficient, bevelling of gears, burning, planing, shaping and milling, These rotary burs are advantageous for use with portable grinding tools of 10000 R.P.M. or more. Please specify the type, size of the blade and the shank when ordering.

These carbide tips are used with carbide tipped turning cutters. Tips are fitted with cement.

Cobalt is harder and stronger than high speed steel and provides better wear resistance. Designed for machine and hand drilling tought materials such as stainless steel.

For use with drilling machines, lathes, etc. When ordering, please specify nominal numbers.

These drill chucks are offered for light-duty and heavy-duty portable, bench, or floor type power tools in a wide range of capacities for either threaded or tapered mounting spindles.

For removing taper shanks without any damage from drills sockets or drilling machines. This improved type works more efficienty and is safer.

Designed for drilling with Morse taper shanks, The smaller Morse taper number is for the hole size of the drill insertion and the larger Morse taper number for the outside socket fitting.

The keyless drill chuck is usually used on precision drilling machinery where close tolerance drilling is essential. Designed for both tool room and production machinery where accuracy, gripping power and keyless features are desired.

Self centering knuckle or joint has ample bearings to resist the severe strains of both end and side thrust. 2 types, A & B are available. Please specify which type is required when ordering.

Individually hob-cut from extra high carbon tool steel. Heat treated, tempered and tested to obtain sharp, perfectly formed teeth in every knurl. Can be furnished in coarse, medium or fine grade and in either straight line or diamond pattern.

The opening of the lathe dog is machined with the face at a right angle. Please indicate straight or bent tail when ordering.

The hand taps most commonly employed today are used in conjunction with a machine, e.g. a tapping machine, rather than by hand . Thus, it is more common to employ a tap with a cutter shape most suitable for the conditions of use than using in sequence, three taps, i.e. the taper of Carbon Steel and High Speed Steel are available. When ordering, please specify which one.

For dressing over bruised or rusty threads, or cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.

These round adjustable dies are used in either hand stock holders or machine holders. These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads. Most commonly made of carbon steel, but high speed steel threads are also available.

Designed to be used with drill, reamer and other shanks which have a morse taper shank.

For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.

For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.

For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.

High speed, steel tool bit material is not hardened as it is made for general use. The material is available in 2 types, square and rectangular, to suit the users requirements. These plates are supplied in 300mm length pieces.

Specially designed to withstand high-speed heavy-duty operations. Incorporated are a taper roller bearing, thrust ball bearing, ball bearing and other special bearings.

These sets are designed for cutting threads of a variety of sizes easily, all with one set. Suitable for jobs involving a wide range of on site threading work. These are single tap or three tap sets available in the same thread cutting range. When ordering, please specify the set number, thread cutting range, and thread type, (whitworth, metric, etc), by indicating the exact code number.

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips.

This design relieves the cutter blade from excessive pressure, avoiding chattering and climbing of the blade during cutting operation. For holding plate tool bits.

For use in cutting hard materials like heat-treated alloy steels. die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders.

High speed, steel tool bit material is not hardened as it is made for general use. The material is available in 2 types, square and rectangular, to suit the users requirements. These plates are supplied in 300mm length pieces.

Made of heat treated steel and can create various hole sizes by single drill in steel, stainless steel, plastic or wood up to 6mm depth.

Adjustable handle for round dies. Select suitable diameter to fit your round dies.

These drills are designed for holes required several times deeper than the diameter

The drills are of the correctional two-flute design with helix angles, flute and point shapes slected selected for general purpose applications. They may be used very successfully in cast iron, steel forging and other materials.

The drills in these sets are high speed steel, general purpose, straight shank twist drills for portable or machine drilling in metric sizes. Set are all furnished in polyethylene or steel folding cases.

The jaws are made of tool steel, carefully hardened and tempered for perfect performance. The handle is knurled for safe, easy operation.

A square bar type restorer with 8 different lands. Where a die cannot be used, a few easy passes with the apporpriate land of the restorer over the damaged face of a bolt or a pipe will restore the thread wihout reducing the diameter. As only the displaced metal removed, the original fit is preserved

These value seat cutting tools are easier than ordinary type cutters in assembly and handling for precision cutting work. Remove the value cap or flange and fit the suitable cutter to the spindle. Then, set the fixing bed using a tightening bolt for the cap or flange. Check that the cutter fits horizontally with the value seat and is in the center position. At this point you set the adjustable, begin the cutting operation by turning the handle clockwise. A standard set of 1″ to 4″ cutters.

For dressing over bruised or rusty threads, or for cutting occasional new threads. No special holder required for these dies, simply use the appropriate sized wrench.