Knipex Insulated Wire Stripper
For single, multiple and fine strand conductors with plastic or rubber insulation with max. 5mm diam. or respondent 10mm² cable cross section. Easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut. Made of special tool steel, oil-hardened and tempered.
Knipex Wire Stripper
For single, multiple and fine strand conductors with plastic or rubber insulation with max. 5mm diam. or respondent 10mm² cable cross section. Easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut. Made of special tool steel, oil-hardened and tempered.
Electric Cable and Wire Stripper
Strips the outer vinyl cover from electrical wires.
Hydraulic Cable Shoe Pliers
Hydraulic cable shoe pliers for non-insulated terminals.
Knipex Crimping Pliers with Changer Magazine
KNIPEX MultiCrimp®. Lever action crimping pliers with changer magazine, for the most common crimping applications.
Cable Shoe and its Clamping Tool Kit
Cable shoe pliers with assorted ferrules.
Knipex Insulated Diagonal Cutter
Furnished with precision cutting edges for soft and hard wire, and creates clean cutting at cutting edge tips, also in the case of thin copper wires. Cutting edges are induction hardened, with the cutting hardness being approximately 62 HRC, Narrow head style for use in confined areas. Made of vanadium electric steel, oil-hardened and tempered.
Knipex Insulated Diagonal Insulation Stripper
Diagonal insulation stripper. High cutting capacity due to high leverage joint with precision stripping holes for single conductors of 1.5 and 2.5 mm².
Insulated Flat Nose Pliers
Insulated handled pliers with flat, narrow jaws for holding or bending wires.
Insulated Long Nose Pliers
Pliers with a long and thin tip, with insulated handles for work in narrow and confined places.
Long Nose Side Cutting Pliers
Pliers with a long and thin tip for work in narrow and confined places.
Insulated Bent Nose Pliers
Curved nose pliers, with insulated handles, for use in narrow places.
Knipex Small Water Pump Pliers
Mini water pump pliers with tongue and groove slip joint.
Knipex Plier Wrench
Plier and wrench in a single tool. Excellent for gripping, holding, pressing and bending workpieces. Fast adjustment directly on the workpiece by pushing a button, and no unintentional shift of the gripping jaws and no slipping of the joint. The action of the jaws allows screwed connections to be tightened and released quickly using the ratchet principle.
Slip Joint Pliers
Designed to have the maximum capacity for gripping round objects.
Torque Wrench
A device which shows the force of torque with which a screw or nut is being tightened. It allows one to set screws exactly at a predetermined torque without any effort. A wide range of models from different manufacturers are available.
Internal Pipe Wrench
Reduces pipe assembly and disassembly time by 80%. A self-locking, reversible, reversible, internak pipe wrench can be used with ratchets, extenstions and impact/air wrenches. Suitable for installing or removing pipes located in tight spots, extremely hot and rusted tight. It wont’t create knuckles, broken pipes or ruined walls, and won’t scar chromed pipe, can’t damage threads and can remove the most stubborn nipples.
Chain Pipe Wrench
Drop forged from vanadium alloy steel with a chain made of nickelchrome molybdenum steel. Will fit to objects of any shape : round, square, hexagon, etc. Can be used in close quarters where it would be difficult to use a pipe or wrench. This wrench has ratchet action which enables it to tighten and free up without being removed from the pipe.
Adjustable Speed Wrench
A tool that serves as an adjustable wrench and a pipe wrench. The jaws are milled extra deep for speedy operation.
Motor Wrench
Well adapted for industrial use. Natural, polished finish, rustproof with tight grip jaws.
45 degree Pipe Wrench
45 degree angle jaws with offset teeth in opposite directions. Teeth are additionally induction hardened. Made of chrome vanadium steel, oil-hardened and tempered.
Pipe Wrench
Powerful all alloy housing and handle. Housing guaranteed not to break or wrap. Chrome molybdenum steel jaws will not slip or lock on pipes. The adjusting nut spins smoothly on flames of all sizes.
Hexagon Bit Set
A handy tool kit to tighten and loosen hexagon head cap screws.
Allen Hexagon Wrench Set
A common tool used for tightening and loosening hexagon head cap screws. Available in a set of common sizes, in metric and inches.
Allen Hexagon Wrench (Inches)
A common tool used for tightening and loosening hexagon head cap screws.
Allen Hexagon Wrench (Metric)
A common tool used for tightening and loosening hexagon head cap screws.
Claw Type Valve Wheel Wrench
For opening and closing cargo valves. Specify the overall length when ordering.
Hook Spanner Wrench
A tool to tighten and loosen round nuts with notches. Sizes fit to the outer diameter of round nuts.
6-Point T-Type Wrench
Broached and chrome plated with a smoothed surface.
Open & Ratchet Type Box Wrench Set
One standard open end, the other has ratchet type 1 point wrenches which can fasten the bolt or nut using a ratchet mechanism at only 5 degree handle swinging space. Both heads have same size openings.
Open & Ratchet Type Wrench
One standard open end, the other has ratchet type 1 point wrenches which can fasten the bolt or nut using a ratchet mechanism at only 5 degree handle swinging space. Both heads have same size openings.
Open & 12 Point Box Wrench (Inches) KCST
For use in close quarters. The open end is pointed with slim jaws. The other end is a thin walled 12 point box head. Both heads have the same size opening.
Open & 12 Point Box Wrench (Metric) KCST
For use in close quarters. The open end is pointed with slim jaws. The other end is a thin walled 12 point box head. Both heads have the same size opening.
Double Offset Wrench
Adapted to work in close quarters. Drop forged from selected alloy steel.
Single Open End Wrench
Milled surface and smoothed edge, opening size is tamped on the head.
Double Offset Wrench Set
For use in awkward places and connecting rods, main bearings cylinder head and spring clips, etc.
Double Open End Wrench Set
Chrome vanadium steel with head polished and clipped into a metal clip.
Driver Socket
These attachments allow you to drive screws with sockets wrenches.
Socket Adapter
Used to fit ratchet handles to sockets which have larger or smaller square drive fittings.
Universal Joint
Made from selected alloy steel with approximately a 140 degree operating range.
Extension Handle and Bar
Made from selected alloy steel.
Offset Handle
Made from selected alloy steel with a non-revolving knurled grip.
Nut Spinner Handle
Made from selected alloy steel. Fiexible head, knurled grip and a cross hole in the end for use with sliding bars.
Ratchet Handle
Drop forged from selected steel with 24 teeth in the ratcheting-gear instead of the usual 16 to 20.
1/2″ Square Drive 12 Point Deep Socket Wrench
Deep sockets made of a special alloy steel.
1/4″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
