Round Hole Punch
Forged from selected tool steel with a fully polished finish.
Cape Chisel
Made from special selected alloy steel. Lacquered body and polished blade.
Cold Chisel
These chisels are made of tough selected alloy steel which has been carefully tempered to assure toughness and ample strength
Carpenters’ Pincer
Extreme wear resistance and good balance. Made of special tool steel, oil-hardened and tempered.
Circle Glass Cutter
These glass cutters are designed for cutting round glass pieces in the range between 80 to 600mm. The cutting points are made of industrial diamond and on the other end of the glass cuttter is a special rubber piece fitted to ensure a correct, even cut.
Hand Held Glass Cutter
These glass cutters are for cutting straight plate glass with the use of straight scales. Industrial diamonds are used for the cutting point to ensure easy cutting.
Hammer Handle
Tough hard wood handle shaped and finished for a comfortable, sure grip.
Rubber Hammer
Soft but tough, non-flaking neoprene head prevents damage to the surface being worked on.
Spare Head for Plastic Hammer
Furnished with replaceable round tips of tough plastic.
Chipping Hammer
Designed for removing boiler, scale, rust or paint on vessels, etc. Forged from a special grade of steel. Handle made of hard wood.
Claw Hammer
Drop forged of specially heat-treated steel. Round bell face enables easier driving of nails close to butting surfaces and in corners.
Testing Hammer
For testing and investigation boilers, welding joints, hulls etc. Designed for detecting structural defects by the sound created from the hammering. Made from specially selected alloy steel with a hickory handle.
Blacksmiths’ Sledge Hammer with Handle
This double head hammer with smooth faces can be furnished with or without a handle. When ordering, please specify whether a handle is required or not. The hammer head will be furnished without a handle unless otherwise specified.
Ball Pein Hammer
The perfect ball pein hammer for all industries. Accurately balanced. Has a tough drop forged head with a selectively hardened face and pein. Fine quality, lacquer finished, with hickory handles shaped for ease in use.
Pozi Screwdriver
The unique shape of the bit provides excellent driving control with less operator fatigue. The Pozidriv screw is incorporated with visible ribs in the groove, so Phillips should not be used with Pozidriv screws.
Impact Screwdriver Set
Designed to work with screws that are set tight due to freezing or corrosion. By hammering the head of the screwdriver, a sudden, sharp pressure is applied to the screw causing it to be jarred loose. Supplied with interchangeable bit for rotation in the left or right direction.
Automatic Screwdriver with Ratchet
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Spark Testing Screwdriver Set
For spark testing of low voltage 100 – 220V – AC 100 – 350V – DC 6 various interchangeable bits. For spark testing of high voltage: 2500 – 15000V – AC 6 various interchangeable bits.
Watch Makers’ Screwdriver Set
For precision work with small screws. The end of the handle rotates, permitting your fingers to stay on the end during screwing work. Set supplied in a plastic case.
Offset Screwdriver
For work in close quarters. Made from selected alloy steel. Mechanic and Phillips point drivers are available. Chrome plated finished.
Gripping Screwdriver
Heat-treated, hardened, alloy steel blades. Plastic handle and precision ground tips. Positive gripping mechanism. Can be worked on screws in hard-to-reach places with the assurance that the screw will stay on the blades.
Hexagon Nut Driver
Has a plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Hexagon Nut Driver Set
Deep sockets type nut drivers provided as a set with a steel holding rack. The set consists of nut drivers ranging from 5mm to 12mm in size.
Ratchet Screwdriver with Interchangeable Bit
Supplied with four sizes of magnetic interchangeable bits. They are stored inside the handle.
Stubby Screwdriver
For work in close quarters. The plastic handle screwdrivers are more popular than the wood ones. Plastic handle screwdrivers will be supplied unless specified otherwise.
Square Blade Screwdriver
Tungsten alloy steel square blade, heat-treated and chromed. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
Heavy-Duty Insulated Screwdriver
Tungsten alloy steel blades are interlocked firmly to plastic handles which are hammer-proof and unbreakable. Handles are insulated to withstand up to 1000 AC voltage for insulated type. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
General Purpose Wooden Handle Screwdriver
Tungsten alloy steel blades are set securely in hard wood handles. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
Heavy-Duty Wooden Handle Screwdriver
Tungsten alloy steel blades are piered through a hard wood handle. The end is reinforced with a large nut that permits hammering When ordering, please indicate the blade length for the slotted type not the overall length.
Plastic Handle Screwdriver
Tungsten alloy steel blades are interlocked firmly to plastic handles which are hammer-proof and unbreakable. Handles are insulated to withstand up to 1000 AC voltage for insulated type. The required size must be ordered according to blade length for the slotted type, not the overall length. For philips type screwdrivers, please order according to the indicated number.
Tube Flaring Expander
For condenser, heat exchanger and similar types of tubes. Made of special and hardened tool steel. When ordering, please select the largest size of expander which will fit for the inner tube diameter.
Copper and Brass Tube Cutter
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering.
Cutting and Flaring Tool Set
Designed for cutting or flaring copper, brass or aluminium tubes. The set consists of one cutter, flaring bar and yoke.
Spare Wheel for Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel ans assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking.
Single Wheel Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel ans assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking.
Packing Hook Set
The shank consists of one inner spiral shaft wrapped with an outer spiral of steel wire laid in the opposite direction. The flexible shaft has a solid handle and the hook is carefully tempered and pointed.
Gasket and Washer Cutter
Designed for cutting gaskets or washers from leather, paper, or rubber sheets up to a diameter of 600mm/24″. The knife and center are made of tool steel, are well tempered, and adjustable. A tool box is furnished with the cutter.
Metal Bench Shear
A heavy duty, improved, bench type iron sheet and rod cutter. This unit can be permanently mounted to a bench or bolted to a plank. The cutting lever can be operated with one hand, leaving the other hand free to feed and hold in place the material which is being cut.
Portable Midget Cutter
A portable tool for cutting spring wire off a diameter of up to 4mm. The jaws are riveted to the handle so they are not replaceable. The handles are knurled and covered in plastic . These cutters are easy to handle as they weigh only 300grams and are of a length of only 200mm.
Cable Cutter
Designed for electric cables, of copper, aluminium, etc. Notched jaw hold s and cuts cables in a clean and sharp way.
Wire Rope Cutter
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
Angle Edge Bolt Cutter
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Straight Edge Bolt Cutter
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Heavy Duty Knife with Case
A high carbon, cutlery steel blade. Comes in a plastic case.
Electrician’s Knife
A well-tempered cutlery steel blade with a strong joint and a solid well-proportioned handle.
Cloth Scissors
Made of cutlery steel, hardened and tempered. Individually tested by hard.
Knipex Electrician’s Pliers
The ideal pliers for cable work, gripping and bending wires, and cutting wires of various hardness. Precision cutting edges are induction hardened, cutting edge hardness approximately 60 HRC. Furnished with stripping holes, and for crimping end sleeves.