Impact Screwdriver Set
Designed to work with screws that are set tight due to freezing or corrosion. By hammering the head of the screwdriver, a sudden, sharp pressure is applied to the screw causing it to be jarred loose. Supplied with interchangeable bit for rotation in the left or right direction.
Pozi Screwdriver
The unique shape of the bit provides excellent driving control with less operator fatigue. The Pozidriv screw is incorporated with visible ribs in the groove, so Phillips should not be used with Pozidriv screws.
Ball Pein Hammer
The perfect ball pein hammer for all industries. Accurately balanced. Has a tough drop forged head with a selectively hardened face and pein. Fine quality, lacquer finished, with hickory handles shaped for ease in use.
Blacksmiths’ Sledge Hammer with Handle
This double head hammer with smooth faces can be furnished with or without a handle. When ordering, please specify whether a handle is required or not. The hammer head will be furnished without a handle unless otherwise specified.
Testing Hammer
For testing and investigation boilers, welding joints, hulls etc. Designed for detecting structural defects by the sound created from the hammering. Made from specially selected alloy steel with a hickory handle.
Claw Hammer
Drop forged of specially heat-treated steel. Round bell face enables easier driving of nails close to butting surfaces and in corners.
Chipping Hammer
Designed for removing boiler, scale, rust or paint on vessels, etc. Forged from a special grade of steel. Handle made of hard wood.
Spare Head for Plastic Hammer
Furnished with replaceable round tips of tough plastic.
Rubber Hammer
Soft but tough, non-flaking neoprene head prevents damage to the surface being worked on.
Hammer Handle
Tough hard wood handle shaped and finished for a comfortable, sure grip.
Hand Held Glass Cutter
These glass cutters are for cutting straight plate glass with the use of straight scales. Industrial diamonds are used for the cutting point to ensure easy cutting.
Circle Glass Cutter
These glass cutters are designed for cutting round glass pieces in the range between 80 to 600mm. The cutting points are made of industrial diamond and on the other end of the glass cuttter is a special rubber piece fitted to ensure a correct, even cut.
Carpenters’ Pincer
Extreme wear resistance and good balance. Made of special tool steel, oil-hardened and tempered.
Cold Chisel
These chisels are made of tough selected alloy steel which has been carefully tempered to assure toughness and ample strength
Cape Chisel
Made from special selected alloy steel. Lacquered body and polished blade.
Round Hole Punch
Forged from selected tool steel with a fully polished finish.
Steel Hose Band
An extremely flexible one piece hose band that gives perfect circumference contact even on irregular surfaces. Made from galvanized steel and stainless steel sealed by gear drive principle, this heavy duty clamp will assure a leak proof seal. When ordering, please indicate the outside diameter of the corresponding band.
Punching Tool Set
Used for punching holes in soft brass, copper, and other soft metals as well as leather, canvas, and gasketing materials. A set for 6 to 38mm is available as standard, size 40 to 55mm are available on request and make to order.
Center Punch
Forged from special alloy steel. The tips are accurately centered and the knurled finger grip assures accurate handling.
Combination Center Punch Set
Forged, tempered, alloy steel. Center punches of various sizes available in one compact case.
Pin Rivet Punch
Forged from selected alloy steel. For driving out pins and bushings and lining up bolt and rivet holes.
Combination Pin Punch Set
Forged, tempered alloy steel. Each set is furnished in a round wooden case.
Combination Chisel Set
Forged tempered alloy steel. Contains 7 different types of chisels in a round plastic case.
Combination Chisel & Punch Set
Forged tempered alloy steel. Consisting of different chisel and pin punch types in a vinyl case.
Letter Set
This machine processed letter set consists of 27 letters and the character “&”. The special machine processed figure set consists of 9 pieces 0 to 8 where as the figure “9” is also to be used as “6”. The letters/figures are accommodated in a steel case.
Figure Set
This machine processed letter set consists of 27 letters and the character “&”. The special machine processed figure set consists of 9 pieces 0 to 8 where as the figure “9” is also to be used as “6”. The letters/figures are accommodated in a steel case.
Stencil Set
Adjustable stencils for letters and figure. Due to a special design, the letters and figures may be joined together to form any word, address, etc. as required. The joined figures and letters are accurately spaced and on even level to assure a perfect print. The size is taken according to the required height of letters and figures.
Blacksmiths’ Tongs Flat & Round
Made of cast steel and heat-treated for durability under harsh working conditions.
Double End Angle Scraper
Made of rounded edge tool steel, hammer forged, and oil finished.
Deck Scraper with Long Handle
Tempered steel blade of 65mm width. Furnished with a wooden handle of 1200mm length.
Hand Scraper
Ideal for removing glue, rust, or paint from wood and glass sufraces.
Steel Scriber
Points are made of the best quality steel, and properly tempered with twisted center portions for a solid grip.
Horseshoe Magnet
A handy strong magnet for moving or lifting metallic objects.
Button Magnet
A handy strong button magnet for moving or lifting metallic objects (steel, etc.).
Hand Saw
Steel blade, hardened and tempered. Thin back. True taper ground, highly polished.
Back Saw
For general use in connection with mitre box and cabinet work. Stiff blade with a heavy steel back. Solid hard wood handle.
Compass Saw Blade
Steel blade, hardened and tempered. Blade fastened securely to the handle.
Tiny Hacksaw Frame
Designed for cutting sheer metal, thin tubing or heavy wires in close quraters. Frames are made of bright finished nickel spring wire. Handle depth is 50mm and the blade are 150x6mm.
Hacksaw Frame
The frames are available in solid type or pipe type. Made of nickel plated steel, and polished or buff finished.
Hacksaw Blade
Carbon Steel – Recommended for general use by engineers, mechanicians and maintenance men.
High Speed Steel – Heat resistant and suitable for cutting tough alloy steel.
High Speed Steel Machine Saw Blade
When ordering, please indicate length and teeth per 25.4mm.
Machine Auger Bits
Used for large timber work and construction. Made from special bit steel for use with electric drill. Shank is straight and round.
Wood Butt Chisel
The blade and socket are forged in one piece. High grade steel. Heat-treated and tempered. Select hard wood handle.
Trowel
Polished mounting securely fastened to the handle. Polished spring steel blades.
Putty Knife
High carbon, cutlery steel, oil hardened blade, tempered and glaze finished.
Stainless Steel Putty Knife
High carbon, cutlery steel, oil hardened blade, tempered and glaze finished.
Square Shovel
A tool used to dig as well as to move loose, granular materials from one spot to another.
Polycarbonate Shovel
Made from polycarbonate shovel with wooden handle. Much lighter than conventional steel shovel, but has temperature resistance and impact resistance.