Insulated Bent Nose Pliers
Curved nose pliers, with insulated handles, for use in narrow places.
Long Nose Side Cutting Pliers
Pliers with a long and thin tip for work in narrow and confined places.
Insulated Long Nose Pliers
Pliers with a long and thin tip, with insulated handles for work in narrow and confined places.
Insulated Flat Nose Pliers
Insulated handled pliers with flat, narrow jaws for holding or bending wires.
Insulated Diagonal Cutting Pliers
Sharp and narrow jaws for working in tight places. Pliers come with insulated handles.
Knipex Insulated Diagonal Insulation Stripper
Diagonal insulation stripper. High cutting capacity due to high leverage joint with precision stripping holes for single conductors of 1.5 and 2.5 mm².
Knipex Insulated Diagonal Cutter
Furnished with precision cutting edges for soft and hard wire, and creates clean cutting at cutting edge tips, also in the case of thin copper wires. Cutting edges are induction hardened, with the cutting hardness being approximately 62 HRC, Narrow head style for use in confined areas. Made of vanadium electric steel, oil-hardened and tempered.
Cable Shoe and its Clamping Tool Kit
Cable shoe pliers with assorted ferrules.
Knipex Crimping Pliers with Changer Magazine
KNIPEX MultiCrimp®. Lever action crimping pliers with changer magazine, for the most common crimping applications.
Hydraulic Cable Shoe Pliers
Hydraulic cable shoe pliers for non-insulated terminals.
Electric Cable and Wire Stripper
Strips the outer vinyl cover from electrical wires.
Knipex Wire Stripper
For single, multiple and fine strand conductors with plastic or rubber insulation with max. 5mm diam. or respondent 10mm² cable cross section. Easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut. Made of special tool steel, oil-hardened and tempered.
Knipex Insulated Wire Stripper
For single, multiple and fine strand conductors with plastic or rubber insulation with max. 5mm diam. or respondent 10mm² cable cross section. Easy adjustment to the required diameter of the solid or stranded wire with knurled screw and lock nut. Made of special tool steel, oil-hardened and tempered.
Insulated Wire Stripper
For single, multiple and fine strand conductors with plastic or rubber insulation.
Knipex Electrician’s Pliers
The ideal pliers for cable work, gripping and bending wires, and cutting wires of various hardness. Precision cutting edges are induction hardened, cutting edge hardness approximately 60 HRC. Furnished with stripping holes, and for crimping end sleeves.
Tweezers
Made from stainless steel. Used for picking up small objects that are not easily handled with hands. Overall length 125mm.
Cloth Scissors
Made of cutlery steel, hardened and tempered. Individually tested by hard.
Electrician’s Knife
A well-tempered cutlery steel blade with a strong joint and a solid well-proportioned handle.
Heavy Duty Knife with Case
A high carbon, cutlery steel blade. Comes in a plastic case.
Straight Edge Bolt Cutter
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Angle Edge Bolt Cutter
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Wire Rope Cutter
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
Cable Cutter
Designed for electric cables, of copper, aluminium, etc. Notched jaw hold s and cuts cables in a clean and sharp way.
Portable Midget Cutter
A portable tool for cutting spring wire off a diameter of up to 4mm. The jaws are riveted to the handle so they are not replaceable. The handles are knurled and covered in plastic . These cutters are easy to handle as they weigh only 300grams and are of a length of only 200mm.
Metal Bench Shear
A heavy duty, improved, bench type iron sheet and rod cutter. This unit can be permanently mounted to a bench or bolted to a plank. The cutting lever can be operated with one hand, leaving the other hand free to feed and hold in place the material which is being cut.
Gasket and Washer Cutter
Designed for cutting gaskets or washers from leather, paper, or rubber sheets up to a diameter of 600mm/24″. The knife and center are made of tool steel, are well tempered, and adjustable. A tool box is furnished with the cutter.
Packing Hook Set
The shank consists of one inner spiral shaft wrapped with an outer spiral of steel wire laid in the opposite direction. The flexible shaft has a solid handle and the hook is carefully tempered and pointed.
Single Wheel Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel ans assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking.
Spare Wheel for Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel ans assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking.
Cutting and Flaring Tool Set
Designed for cutting or flaring copper, brass or aluminium tubes. The set consists of one cutter, flaring bar and yoke.
Copper and Brass Tube Cutter
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering.
Tube Flaring Expander
For condenser, heat exchanger and similar types of tubes. Made of special and hardened tool steel. When ordering, please select the largest size of expander which will fit for the inner tube diameter.
Plastic Handle Screwdriver
Tungsten alloy steel blades are interlocked firmly to plastic handles which are hammer-proof and unbreakable. Handles are insulated to withstand up to 1000 AC voltage for insulated type. The required size must be ordered according to blade length for the slotted type, not the overall length. For philips type screwdrivers, please order according to the indicated number.
Heavy-Duty Wooden Handle Screwdriver
Tungsten alloy steel blades are piered through a hard wood handle. The end is reinforced with a large nut that permits hammering When ordering, please indicate the blade length for the slotted type not the overall length.
General Purpose Wooden Handle Screwdriver
Tungsten alloy steel blades are set securely in hard wood handles. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
Heavy-Duty Insulated Screwdriver
Tungsten alloy steel blades are interlocked firmly to plastic handles which are hammer-proof and unbreakable. Handles are insulated to withstand up to 1000 AC voltage for insulated type. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
Square Blade Screwdriver
Tungsten alloy steel square blade, heat-treated and chromed. The required size must be ordered according to the blade length for the slotted type, not by the overall length.
Stubby Screwdriver
For work in close quarters. The plastic handle screwdrivers are more popular than the wood ones. Plastic handle screwdrivers will be supplied unless specified otherwise.
Ratchet Screwdriver with Interchangeable Bit
Supplied with four sizes of magnetic interchangeable bits. They are stored inside the handle.
Hexagon Nut Driver Set
Deep sockets type nut drivers provided as a set with a steel holding rack. The set consists of nut drivers ranging from 5mm to 12mm in size.
Hexagon Nut Driver
Has a plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Gripping Screwdriver
Heat-treated, hardened, alloy steel blades. Plastic handle and precision ground tips. Positive gripping mechanism. Can be worked on screws in hard-to-reach places with the assurance that the screw will stay on the blades.
Offset Screwdriver
For work in close quarters. Made from selected alloy steel. Mechanic and Phillips point drivers are available. Chrome plated finished.
Watch Makers’ Screwdriver Set
For precision work with small screws. The end of the handle rotates, permitting your fingers to stay on the end during screwing work. Set supplied in a plastic case.
Spark Testing Screwdriver Set
For spark testing of low voltage 100 – 220V – AC 100 – 350V – DC 6 various interchangeable bits. For spark testing of high voltage: 2500 – 15000V – AC 6 various interchangeable bits.
Automatic Screwdriver with Ratchet
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.