1″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/2″ Square Drive 12 Point Deep Socket Wrench
Deep sockets made of a special alloy steel.
1/2″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/2″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
1/4″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
2-Arm Gear and Wheel Puller
Specially designed for LNG-LPG vessels and tankers, but also essential for factories handling explosive materials. Made of beryllium material except for the gears which are tightly covered by copper alloy casing assuring no sparking during operation.
2-Extension Aluminum Ladder
Made in two sections from aluminium alloy with round non-slip rungs. Has non-slip rubber shoes at the bottom end with an automatic spring lock on each step which has a 35cm stepping space. Easy to carry and set up whenever it is required.
3-Arm Gear and Wheel Puller
Drop forged from vanadium steel. This rigid 3 arm puller has been designed for situations where the use of a 2 arm puller is not possible.
3-Extension Aluminum Ladder
Made in three sections from aluminium alloy with non-slip rungs and self-aligning safety shoes. Please specify the extended length when ordering.
3/4″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
3/8″ Square Drive 12 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
3/8″ Square Drive 6 Point Socket Wrench
These socket wrenches are made of a special chromed alloy steel.
45 degree Pipe Wrench
45 degree angle jaws with offset teeth in opposite directions. Teeth are additionally induction hardened. Made of chrome vanadium steel, oil-hardened and tempered.
6 Point Y-Type Wrench
Made from selected alloy steel and heat-treated. It has 3 openings for 3 nut sizes, and the 2 vacant bars can be used as handles.
6-Point T-Type Wrench
Broached and chrome plated with a smoothed surface.
Abrasive Sandpaper
Ideal abrasive for hand sanding wood, paint fillers, paint under coats and varnishes.
Abrasive Wheel
Aluminum oxide abrasive wheels. Available in various diameters, thickness and grits. Used with bench grinders.
Accessories for Air Operated Grease Pump
For use with above air operated grease pumps.
Adjustable Hook Spanner
This spanner has the advantage of strength and adjustability. One wrench can be used for bolts of a variety of sizes by simply adjusting the jaw. The handle is strengthened so that the wrench can be used safely with a hammer.
Adjustable Speed Wrench
A tool that serves as an adjustable wrench and a pipe wrench. The jaws are milled extra deep for speedy operation.
Adjustable Wrench
Drop forged from special alloy steel with thin tapered jaws. A square shoulder on the sliding jaw shank prevents it from loosening during use. The head has a polished finish and the handle is chromed.
Air Powered Grease Lubricator
Works with compressed air for easy speed greasing by just pulling the trigger. Pressure is maintained constantly and the lubrication level is consistent. Works with a replaceable grease cartridge which is easy to attach and keep dust and dirt out of the grease. Grease level inside the cartridge can be checked at a glance so the grease will not run out unexpectedly.
Air-Operated Grease Pump
A pump unit for all types of lubricants which is easy to handle and maneuver, making it suitable for work on ships as well as industrial plants or repair shops.
Allen Hexagon Wrench (Inches)
A common tool used for tightening and loosening hexagon head cap screws.
Allen Hexagon Wrench (Metric)
A common tool used for tightening and loosening hexagon head cap screws.
Allen Hexagon Wrench Set
A common tool used for tightening and loosening hexagon head cap screws. Available in a set of common sizes, in metric and inches.
Angle Edge Bolt Cutter
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Automatic Screwdriver with Ratchet
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Back Saw
For general use in connection with mitre box and cabinet work. Stiff blade with a heavy steel back. Solid hard wood handle.
Ball Pein Hammer
The perfect ball pein hammer for all industries. Accurately balanced. Has a tough drop forged head with a selectively hardened face and pein. Fine quality, lacquer finished, with hickory handles shaped for ease in use.
Banding Clamp & Tool
These products have a wide range of application for hose and pipe fastening and are used in most industries. Tensioning tools, bands, buckles, performed clamps, hose couplings, mounting brackets, accessories and spare parts offer a universal and economical fastening system. The products will connect, clamp, fasten, secure and fix hoses, pipes, cables, signs, boards, etc.
Bearing Puller Set
The slide hammer bearing puller set has been designed for removing “hard-to-pull’ bearings without damaging the bearing housing. Expansion grippers are available from No. 00 to 06. These numbers 00 to 06 are indicating the last two numbers of the bearing number. When ordering, please make sure to indicate the last two bearing figures to get the right tools for your work. The expansion grippers are drop forged from vanadium alloy steel, heat-treated and chromed plated.
This bearing puller kit has been designed to remove the inner and outer bearing rings from bearing mounted to various fittings, shafts, etc. Made of drop forged, heat-treated vanadium alloy steel.
Blacksmiths’ Sledge Hammer with Handle
This double head hammer with smooth faces can be furnished with or without a handle. When ordering, please specify whether a handle is required or not. The hammer head will be furnished without a handle unless otherwise specified.
Blacksmiths’ Tongs Flat & Round
Made of cast steel and heat-treated for durability under harsh working conditions.
Blind Rivets
High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to reverse side available. Rivets are made in various sizes with head styles in aluminum, steel, morel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below.
Blue Paste
A jelly-like paste made of super corpuscular dyes furnished in a tube.
Button Magnet
A handy strong button magnet for moving or lifting metallic objects (steel, etc.).
C-Type Screw Clamp
Drop forged from strong special steel and heat-treated. The screws are made from tough, wrought steel, heat-treated and threading for strength and rapid adjustment.
Cable Cutter
Designed for electric cables, of copper, aluminium, etc. Notched jaw hold s and cuts cables in a clean and sharp way.
Cable Shoe and its Clamping Tool Kit
Cable shoe pliers with assorted ferrules.
Cape Chisel
Made from special selected alloy steel. Lacquered body and polished blade.
Carborundum Oil Stone
For carpenters and engineers. May be used dry or with oil or water. Sufficiently porous to assure a good grinding or cutting action in combination with wax or oil.
Carborundum Round Edge Slip
A useful abrasive carborundum stone for grinding or edging of tools with curved edges. Maybe used dry or with a moderate application of oil.
Carpenters’ Pincer
Extreme wear resistance and good balance. Made of special tool steel, oil-hardened and tempered.
Center Punch
Forged from special alloy steel. The tips are accurately centered and the knurled finger grip assures accurate handling.
Chain Hoist
Specially heat-treated and proof tested steel chain hoists equipped with a safety guard. These hoists can be operated at any angle and are equipped with a slip steel bolt which allows easy replacement of the load chains. The load wheel operates on precision ball bearings which are sealed with lubrication inside to eliminate the adverse effect of particles and dust on the moving parts. The top and bottom hooks are swivel type to allow easy turning of the load. These hoists have superior working capacities.
Chain Pipe Wrench
Drop forged from vanadium alloy steel with a chain made of nickelchrome molybdenum steel. Will fit to objects of any shape : round, square, hexagon, etc. Can be used in close quarters where it would be difficult to use a pipe or wrench. This wrench has ratchet action which enables it to tighten and free up without being removed from the pipe.
Chipping Hammer
Designed for removing boiler, scale, rust or paint on vessels, etc. Forged from a special grade of steel. Handle made of hard wood.
Circle Glass Cutter
These glass cutters are designed for cutting round glass pieces in the range between 80 to 600mm. The cutting points are made of industrial diamond and on the other end of the glass cuttter is a special rubber piece fitted to ensure a correct, even cut.
Clamp Base Vise
A handy portable vise. The body is made of cast iron and the jaws are made from solid cube of steel.
Claw Hammer
Drop forged of specially heat-treated steel. Round bell face enables easier driving of nails close to butting surfaces and in corners.