Padlock
Made of brass. Each lock comes with 2 or 3 keys. Nominal size is its width. When ordering, please specify the size.
Packing Hook Set
The shank consists of one inner spiral shaft wrapped with an outer spiral of steel wire laid in the opposite direction. The flexible shaft has a solid handle and the hook is carefully tempered and pointed.
Oxygen and Acetylene Gas Cylinder Regulator
Single stage with easy to read 60mm gauges. Used for general welding and cutting, these regulators feature greater flow and accuracy, more economy, simple repairs and greater safety. Oxygen regulators have two types of male and female inlet threads.
Outside Micrometer with Interchangeable Anvil
Each micrometer is equipped with a series of interchangeable anvils. Each anvil is marked to show its capacity and is fitted with an adjustable collar to prevent wear. Graduated in 0.01mm increments.
Outside Micrometer with Counter
A numeral counter indicates sizes simulaneously as the measurements are being taken. The display is very easy to read. Graduated in 0.01mm increments from 25mm to 500mm on the standard size micrometer but micrometers up to 1000mm are also available upon request.
Outside Micrometer
Graduated in 0.01mm increments with standard measurement sizes from 25mm to 500mm. Micrometers measuring up to 1000mm are also available upon request.
Outside Calipers
For the easy measurement of the outer diameter of pipes and other round objects. Made of hardened steel with tips of tempered steel.
Open & Ratchet Type Wrench
One standard open end, the other has ratchet type 1 point wrenches which can fasten the bolt or nut using a ratchet mechanism at only 5 degree handle swinging space. Both heads have same size openings.
Open & Ratchet Type Box Wrench Set
One standard open end, the other has ratchet type 1 point wrenches which can fasten the bolt or nut using a ratchet mechanism at only 5 degree handle swinging space. Both heads have same size openings.
Open & 12 Point Box Wrench (Metric) KCST
For use in close quarters. The open end is pointed with slim jaws. The other end is a thin walled 12 point box head. Both heads have the same size opening.
Open & 12 Point Box Wrench (Inches) KCST
For use in close quarters. The open end is pointed with slim jaws. The other end is a thin walled 12 point box head. Both heads have the same size opening.
One-Side Calipers
For measuring the thickness of the walls of pipes or values, etc. Made of hardened steel with tempered steel points.
Oil Suction Gun
Provide fast, clean servicing for rapid transfer of any fluid or lubricant. Pulling or pushing the handle intakes or discharges the lubricant.
Oil Gauging Tape
So called ullage tape. Made of steel or stainless steel with a chromed brass drawing weight attached. Metric or metric and inch graduated tapes are available. The tapes are mounted to a strong frame with a wooden carrying handle. Tapes of lengths up to 50mtr are also available upon request.
Offset Screwdriver
For work in close quarters. Made from selected alloy steel. Mechanic and Phillips point drivers are available. Chrome plated finished.
Offset Handle
Made from selected alloy steel with a non-revolving knurled grip.
Nut Spinner Handle
Made from selected alloy steel. Fiexible head, knurled grip and a cross hole in the end for use with sliding bars.
Nozzle Lapping Paste
High grade silicon carbide abrasive paste for nozzle lapping. Specify grit number when ordering.
Nozzle Cleaner
For cleaning holes of welding torch nozzles. Made of stainless steel, sizes from 0.5mm to 2mm, 8 pcs/set.
Non-Spark Testing Hammer
Reliable testing hammer will not produce sparks.
Non-Spark Striking Ring Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material and a standard grade aluminum bronze alloy. These tools are non magnetic and non corrosive. The sizes of the items specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Striking Open Wrench
One type of non-spark tools are available, a high quality grade beryllium copper alloy material. This tool is non magnetic and non corrosive. The sizes of this items specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Straight Pipe Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material, and a special aluminium bronze material. These tools are non-magnetic and non-corrosive. The sizes of the item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Square Shovel
One type of non-spark tools are available, a special aluminum bronze material. This tool is non-magnetic and non-corrosive. The sizes of the item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Socket Wrench Set
Able to furnish 12.7mm square drive set only.
Non-Spark Slotted Screwdriver Plastic Handle
The sizes listed below are of blade size only, not overall length.
Non-Spark Single Open Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material and a standard grade aluminium bronze alloy. These tools are non magnetic and non corrosive. The sizes of the items specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Single End Wrench
One type of non-spark tools are available, a high quality grade beryllium copper alloy material. This tool is non-magnetic and non-corrosive. The sizes of this item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Side Cutting Pliers
A non-sparking tool with powerful leverage and rigid side cutters.
Non-Spark Ratchet Wrench
The size of this wrench is determined by its opening across flats, not by bolt diameter.
Non-Spark Radio Pliers
Long thin taper nose for use in close quarters. An ideal tool for quick electrical and repair works.
Non-Spark Heavy Duty Beryllium Copper Alloy Knife
Edged cutting blade length is 150mm and overall length is 265mm.
Non-Spark Hand Scraper with Handle
Designed for scraping in areas where non-sparking tools are required.
Non-Spark Fibreglass Square Scoop and Shovel
Made of fibreglass, a non-sparking safety tool, also will not scrape or strip the protective coating of a tank when sludging. Heavy duty, lightweight and most suitable tool for sludging oil tanks. Available in Scoop & Shovel.
Non-Spark Double Open End Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material, and a special aluminium bronze material. These tools are non-magnetic and non-corrosive. The sizes of the item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Double Offset Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material, and a special aluminium bronze material. These tools are non-magnetic and non-corrosive. The sizes of the item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Diagonal Cutting Pliers
This heavy duty diagonal cutting pliers is designed for cutting hard wires, etc. at close quarters.
Non-Spark Cold Chisel
To be used on jobs where non-sparking cold chisels are required.
Non-Spark Claw Hammer
One side for hammering and the other for pulling out nails.
Non-Spark Chipping Hammer
Designed for chipping of scale, rust or old paint in vessels where non-sparking safety tools are indispensable.
Non-Spark Ball Pein Hammer
Reliable ball pein hammer, will not produce sparks.
Non-Spark Allen Hexagon Wrench
One type of non-spark tool is available, a high quality grade beryllium copper alloy material. This tool is non-magnetic and non-corrosive. The sizes of this item specified below are standard, but larger or smaller sizes are available upon request.
Non-Spark Adjustable Wrench
Two types of non-spark tools are available, a high quality grade beryllium copper alloy material, and a special aluminium bronze material. These tools are non-magnetic and non-corrosive. The sizes of the item specified below are standard, but larger or smaller sizes are available upon request.
Needle File Set
File sets which are used for precision work. Available in industry-common sizes, in sets of 10’s.
Nails
Flat type with a diamond driving point. Supplied by kilogram but usually packed four kilograms per box.
Multi-Purpose Lubricant
These lubricants will stop squeaks, displace moisture penetrate and prevent corrosion. Specify product name and type when ordering.
Mounted Wheel
The mounted wheels are designed for use when ordinary grinding wheels cannot be used. Used in connection with air or electric drilling machines of 6mm capacity. Please specify the number of the required shape.
Mounted Wheel
The mounted wheels are designed for use when ordinary grinding wheels cannot be used. Used in connection with air or electric drilling machines of 6mm capacity. Please specify the number of the required shape.
Mounted Wheel
The mounted wheels are designed for use when ordinary grinding wheels cannot be used. Used in connection with air or electric drilling machines of 6mm capacity. Please specify the number of the required shape.